Large pressing area
Mould dimensions and platen surface are assessed together.
Composite presses
Discover the Hidrosay press family for composite part production. Let us develop a solution around your material and process requirements.
HIDROSAY / PRESS FAMILIES04OF 07 FAMILIES
INTERACTIVE / 3D VIEWComposite moulding
Loading 3D model…
DRAG / ROTATE · LIGHT WITH POINTER · SCROLL / ZOOM
The 3D view is a representative model of the product family's form. Technical dimensions and equipment are determined by project requirements.
Model catalogue
Composite presses
Choose a model: the technical drawing and values update to it. Below, all models side by side.
AHCP-1000E-50 Hydraulic composite press
- Pressing force
- 1000 ton
- Operating pressure
- 240 bar
- Tooling area
- 1300 × 1300 mm
- Ram stroke
- 850 mm
- Maximum daylight
- 1200 mm
- Approach speed
- 150 mm/s
- Working speed
- 2,5 – 4 mm/s
- Ejector force
- 50 ton
- Ejector stroke
- 200 mm
AHCP-1200E-50 Hydraulic composite press
- Pressing force
- 1200 ton
- Operating pressure
- 240 bar
- Tooling area
- 1300 × 1300 mm
- Ram stroke
- 850 mm
- Maximum daylight
- 1200 mm
- Approach speed
- 150 mm/s
- Working speed
- 2,5 – 4 mm/s
- Ejector force
- 50 ton
- Ejector stroke
- 200 mm
AHCP-1500E-50 Hydraulic composite press
- Pressing force
- 1500 ton
- Operating pressure
- 240 bar
- Tooling area
- 1300 × 1300 mm
- Ram stroke
- 850 mm
- Maximum daylight
- 1200 mm
- Approach speed
- 150 mm/s
- Working speed
- 2,5 – 4 mm/s
- Ejector force
- 50 ton
- Ejector stroke
- 200 mm
Compare the models
| Specification | AHCP-1000E-50 | AHCP-1200E-50 | AHCP-1500E-50 |
|---|---|---|---|
| Pressing force | 1000 ton | 1200 ton | 1500 ton |
| Operating pressure | 240 bar | 240 bar | 240 bar |
| Tooling area | 1300 × 1300 mm | 1300 × 1300 mm | 1300 × 1300 mm |
| Ram stroke | 850 mm | 850 mm | 850 mm |
| Maximum daylight | 1200 mm | 1200 mm | 1200 mm |
| Approach speed | 150 mm/s | 150 mm/s | 150 mm/s |
| Working speed | 2,5 – 4 mm/s | 2,5 – 4 mm/s | 2,5 – 4 mm/s |
| Ejector force | 50 ton | 50 ton | 50 ton |
| Ejector stroke | 200 mm | 200 mm | 200 mm |
HIDROSAY / PRODUCT REFERENCEIn this family,
what do we assess?
Process conditions
Heating, pressure and dwell stages are added to the control sequence if needed.
Access and maintenance
Mould connections, loading direction and service space are planned in advance.
USEFUL PROJECT INFORMATION
Composite type, mould drawing, part dimensions, temperature and pressure range, target cycle.
Build your press
